Choosing an interior wall panel starts with the required format, surface finish and installation conditions. For distributors and project buyers, SPC, PVC and WPC are product categories rather than a complete specification. Compare the selected construction and dimensions, then confirm samples and installation requirements before placing an order.
Quick comparison of the LISI Decor wall panel range
The following reference uses the configurations shown in the LISI Decor product range. Dimensions are in millimetres. Catalogue specifications must be confirmed for the selected configuration.
| 产品 | Reference dimensions | Construction or surface | Selection question |
|---|---|---|---|
| R-SPC | 400 × 800 or 600 × 1200; 5 mm thick | 实心均质 SPC 芯层 | Which panel format fits the wall layout? |
| L-SPC | 400 × 800 or 600 × 1200; 8 mm thick | ABA construction: rigid SPC outer layers and a foamed wood-plastic middle | Does this selected construction match the project specification? |
| F-SPC | 1238 × 3000; 2.5 mm thick | 柔性芯层搭配装饰饰面 | What curvature and substrate must the installation accommodate? |
| PVC flat wall panel | 1220 × 2440 × 6.8 | Charcoal fine-cell core with decorative PVC film | Which finish and compatible adhesive system will be used? |
| WPC wall panel | 1220 × 2440; 8 mm thick | Cream fine-cell WPC core with decorative film finish | Which physical finish sample matches the interior palette? |
When to examine the SPC wall panel range
The SPC wall panel range includes solid, layered and flexible systems. R-SPC and L-SPC share the listed panel formats, but their core construction and thickness differ. Include the system name in your enquiry so the quotation refers to the intended product.
For curved walls or columns, F-SPC is the flexible option shown in this range. Confirm the required curvature, substrate preparation and installation method with the supplier before specifying it. A flexible product description alone does not establish the acceptable radius for every project.
When to examine PVC flat panels and profiles
The PVC wall panel range combines a flat panel format with decorative profiles. The listed small fluted profile is 150 × 10 × 3000 mm and the large concave profile is 60 × 13 × 3000 mm, both expressed as width × thickness × length.
Check how the flat panels and profiles will meet at edges and transitions. For adhesive installation, discuss substrate preparation and adhesive compatibility for the selected product and site conditions. Ask for a sample of the actual finish rather than making the decision from an interior illustration alone.
When to examine WPC decorative wall panels
The WPC wall panel range lists a 1220 × 2440 mm format at 8 mm thickness. Decorative film options include woodgrain, fabric, marble, metal and leather-look surfaces. Grey ash and dark walnut are illustrated in the catalogue; available patterns depend on the chosen configuration.
These are decorative surface descriptions. A marble-look or metal-look film should be specified as a decorative finish, rather than described as natural stone or a solid metal panel. Confirm colour and texture using a physical sample.
What to confirm before comparing quotations
- Product identity: category, system name, dimensions, thickness and finish reference.
- Application: interior location, wall layout, any curved details and substrate condition.
- Installation: proposed adhesive or fixing method, edge details and supplier installation guidance.
- Quantity and destination: required panel quantity or area, delivery destination and requested schedule for supplier confirmation.
- Documents: request available product documentation and any project-required evidence for the exact selected configuration.
- Sample approval: agree which physical sample will be used to confirm colour, texture and construction.
Do not assume a performance rating or certification from the material abbreviation. Where a project requires evidence, check the relevant document, product scope and applicable requirement before approval.
Frequently asked procurement questions
Which material is best for an interior project?
Start with the wall design, required panel format, finish and installation conditions. The selected system must then be checked against the project requirements. The category name alone is not enough to select the product.
Can I select a curved-wall panel from this range?
F-SPC is listed for curved wall and column designs. Share the intended curvature and substrate details, then obtain confirmation of the installation requirements before specifying it.
Are all decorative patterns available for every configuration?
Availability depends on the selected configuration. Request the current finish options and physical samples for the specific panel you intend to order.
What should I send with a wall panel enquiry?
Send the product or system name, preferred finish, dimensions, quantity, destination and intended application. Include wall drawings or installation requirements where relevant so the supplier can clarify the configuration.
Prepare your wall panel enquiry
LISI Decor is the brand of Foshan Suchao New Materials Technology Co., Ltd. Browse the SPC, PVC and WPC wall panel pages, then use the contact page to request available finishes, physical samples and a quotation for your selected configuration.
You can also email sales@lisidecor.com or contact WhatsApp +86 191 8060 3559. Reference specifications in this guide are subject to confirmation; interior images on product pages illustrate possible applications.